Must Read: available-qsat-codes-and-the-software.
WHAT TYPES OF DECODERS SUPPORTS THE LOADING OF QSAT SPYCAM CODES
- Only the following decoders are compatible with, or eligible to load qsat spycam codes: qsat q26g, qsat q28g ,speed hd s1(and of course any other qsat decoder produced after qsat q28g). Any other decoders produced before the above-mentioned decoders cannot load spycam codes
DIFFERENCES AND SIMILARITIES BETWEEN SPYCAM AND ACAM / AVARTACAM CODES
- If your q26g, speed hd s1, or q28g preloaded account has never been renewed but is working, you cannot simply load a new code to add to your existing days without first loading the latest software downloadable here into your decoder. In order words, do not buy another spycam code if the existing one has not expired. Also, if you have not upgraded your expired q26g, q28g or speed, you cannot load a new code into it. On the contrary, if you are using acam code on your own qsat model, as long as it is currently working, you load more and more accounts into it and it will add up to your existing days. This can only be done with spycam only when you have loaded the latest firmware(the latest firmware will wipe your existing acam code and replace your acam menu with accessible spycam menu).
- For now, the first two digits of spycam codes are different and smaller than that of acam / avatarcam codes. e.g we are currently selling avatarcam codes that begins with 48******** while currently spycam code starts with 42********. Put differently, for now, the two codes numbers are different
- Another difference is the fact that, when you are trying to load qsat avatarcam code into a qsat spycam decoder, you will get the following error message ” cannot receive data from server or wrong code error” this is simply telling you that you are loading an invalid code. So please at the point of purchase, always indicate your decoder
- Of course it is a known fact that spycam opens dsthieves and canalsat 22w while acam code only opens dsthieves. Similarly, it is not possible as at the time of posting this article to load a spycam code into an acam decoder or the reverse.
- The two codes cannot be combined on the same decoder. You can only combine either of them with dqiptv or dqcam as the case may be.
- You cannot force qsat q11g for example to use q26g software simply because you want to load spycam code on your q11g. It is either you brick the decoder or get a no match found error
SIMILARITIES
- None of the two codes is superior to the other in opening dst* channels. Do not be deceived, spycam opens the same numbers of dst* channels as acam codes does. Besides, the performance of the channels are the same in relation to dst* channels.
- The method of loading the codes are the same which can be found here.
- Also, both decoders are upgraded using the same method as shown here but with different software
- Another similarity is the fact that you configure internet for all the qsat and speed decoders in the same manner as illustrated here
- All qsat decoders use the same code to bring out hidden xcam setup and which is 1512(if you newly upgrade your qsat decoder and you seem not to find xcam setup to enable you reactivate your acam or spycam codes, (perform the following operations: menu>>setting>>ok button>>then dial 1512 on your remote)
- If you soft-brick your qsat decoder due to bad upgrade of its software, you revive them using the same method as posted here