Unlocking your Huawei 4G MiFi router with E5573s-320 &
E5573s-606 will give you room to use any 4G network sim like ntel, SMILE,
Swift InterC etc…without any form of restriction.
Note, if your don’t have the specified Model stipulated above,
just pretend like NFA and click on the next post.
Requirements
>>Huawei Mobile Partner (if you don’t have it, download it
here)
>>Latest HiLink Drivers (download it here)
>>Latest Huawei HiLink driver V5 (download it here)
>>Huawei E5573s-606 firmware version (download it here)
>>Huawei E5573s-320 firmware version (download it here)
>>Huawei code calculator (download it here)
>>Universal master code generator (download it here)
>>Make sure your Huawei MiFi Modem (Spectranet, InterC) is fully charged
Follow the Below steps to unlock your device.
Step 1: Unzip the Huawei hiLink drivers that you downloaded above and
install them on your PC. Once your installation is complete, reboot your PC so
that the drivers can be fully updated with your PC.
Step 2: Unzip and launch the universal master code generator, put
in your imei and click on generate
Step 3: Copy the flash code(to notepad) from the imei generated
which will serve as your password
Step 4: Insert an unsupported sim into your Huawei E5573s-606 or E5573s-320
router and connect it to your PC via USB cable.
Step 5: Unzip the Huawei E5573s-606 firmware you downloaded and go
to the folder where “Prod&Serv&Cust”, run the file P711S-E5-update_21.110.99.03.00.exe
Step 6: It will request for password, input the flash code you
copied to your notepad as password and hit the ok button. Wait for the installation
to finish. At this point, do not disconnect your usb cable, your PC must not
shot down or otherwise.
Step 7: Once the process has been successfully completed, extract and
launch Huawei code calculator
Step 8: Click on the read tab to generate your unlock code as will
be display on the result field ()
Step 9: Unzip and open the second Huawei E5573s-320 firmware you
downloaded earlier, run the E5573_Update_21.180.17.00.00.exe.
It will update your router firmware and drivers will be installed
accordingly.
Step 10: Once the update is complete, go to your Huawei mobile
partner interface, settings select network settings, and pop up to insert your
unlock code will appear.
Step 11: Enter the unlock code you generated in step 8 and your
Huawei mifi router will be unlocked.
With this, you can rock any 4G network chip in your MiFi router.